19 of 20 - Cellular Data Logger Setup

In this article we go over how to install the Solis Cellular Data Logger on the Energy Storage Inverter.


  1. At the bottom of the inverter is a small cap that can be unscrewed - it should hang loosely from the bottom
  2. The comm port is now exposed - the cellular logger should be plugged directly into the green port
  3. Press up firmly to ensure a snug and secure connection - the logger can be tightened by spinning the connector
  4. Now you will need to go to the App store on your phone and search "Solis Home" then download the app



Once downloaded, go into the app and tap "Register" in the top left corner.


For commissioning the system, you will need to create a basic account. To do this, enter a username, email and password

Then press "Register" and you will be taken back to the main menu.


Tap the plus symbol in the top right corner.

This will bring you to the Add Device screen. A scanner will appear - your camera can now be used to scan the QR code on the data logger. If the scanner is not behaving, select "Enter Code" at the bottom left corner and then enter the SN of the data logger manually.

Note: Scanning the QR code of the inverter will not work


M
Michael is the author of this solution article.

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.