For Additional APSmart Application and Support Please contact support@APsmartGlobal.com
Following slide is introduced best practice for installation: RSD-S-PLC default voltage is between 0.6 and 0.7v DC while connected to a module in the sun, due to flexible/easy mounting it on the frame, installers could quickly preparing by simple 3 steps and make sure PV module+ RSD device is ready to go.
By doing those 3 steps, it would be pertinent to ignore the “bad devices out of box” to guarantee every module is ready to line up, then install them as normal PV modules as before.
There are 4 basic tools to locate failed device, preferred method by IR camera.
The easiest testing method is by Thermometer to measure the PV module’s surface temperature, because if the device failed, module is not operating and its surface temperature significantly lower than others.
RSD-EYE detector is the tool for tracking PLC signals also be able to troubleshoot Transmitters, broken connections. Will be available soon.
- Customer Support: